Commercial electrician for tenant upfits in Fayetteville, NC
Power, lighting and data for a new or remodeled commercial space, from the first walk-through to the final inspection. One licensed contractor and one written bid.

The electrical side of opening a space
An upfit, also called a tenant improvement or build-out, is the work that turns an empty or secondhand commercial space into one that fits the business moving in. Walls move and equipment arrives, and the electrical has to follow: power where the equipment sits, light where people work, and a panel that can carry it all.
Savant Solutions Inc is a North Carolina electrical contractor with an Unlimited license (U.36332) and $2M / $4M general liability coverage. Our shop is in Raeford, and we do upfits in Fayetteville, Hope Mills, Spring Lake, Lillington, Dunn and the counties around them. We work directly for business owners, landlords and property managers, or for the general contractor running the job.
For a recent example, see the lighting and power upfit at the Greater Fayetteville Chamber's new office on our past performance page.
What the electrical work on an upfit includes
Power for equipment
Dedicated circuits and connections for what the business runs: kitchen equipment, coolers, copiers, machinery, and the electrical side of the heating and cooling units.
Lighting
LED lighting laid out for the new floor plan, with switches where staff will use them. Existing fixtures can be reused or replaced one for one where that makes sense.
Receptacles
Receptacles, which most people call outlets, at desks, counters, registers and break rooms, placed for your layout and not the last tenant's.
Panel changes
Added circuits, a new or larger panel, or a service upgrade when the space needs more power. We update the panel schedule, the list on the panel door that says what each breaker feeds.
Exit and emergency lighting
Lit exit signs and battery-backed lights that come on when the power fails, so people can find the way out.
Data cabling
Network cabling to desks, registers and wireless access points, run by the same crews as the power. We install the cabling only. We do not provide phone systems or IT support.
Priced from plans, or from a walk-through
Larger upfits come with drawings from an architect or engineer. Send them and we price what is drawn.
Many smaller upfits have no electrical drawings at all, only a floor plan or a sketch and a list of equipment. That is fine. We walk the space with you, look at the existing panel and what is above the ceiling, and write up a scope: what gets added, what gets reused and what comes out.
Either way you get a written bid before any work starts, with the scope it covers spelled out. Site visits and bids for commercial and industrial work are free. Send plans or ask for a site visit through the bid request form, or call (910) 973-8600. For general contractors, power and data cabling can go on one bid, and we supply license and insurance certificates for your file.
From permit to certificate of occupancy
A certificate of occupancy is the document from the local inspections office that says a space is approved to open. It depends on passing the final inspections, electrical included.
Permit
We pull the electrical permit from the office that covers the address: City of Fayetteville, Cumberland County, Hoke County, Harnett County or another local office.
Rough-in inspection
Rough-in is the stage when boxes, conduit and wire are in but walls and ceilings are still open. The inspector looks at the work that will be hidden, and we meet the inspector on site.
Finish work
After the walls and ceilings are closed, we set the fixtures, receptacles and switches, connect the equipment, label the panel and test everything.
Final inspection
The inspector checks the finished electrical work, including the exit and emergency lighting. Your certificate of occupancy waits on this inspection, so we schedule toward your opening date.
Working while the neighbors are open
Most upfits happen in a building where other tenants are open for business: a suite in a medical office building, a bay in a shopping center, one floor of an office building. Noise, dust and power shutoffs reach people who are not part of your project.
We plan for that before we start. Any shutoff that touches a shared panel or another tenant is agreed with the landlord or property manager ahead of time, and work that would disrupt the neighbors is planned around their business hours. The same goes for a remodel in your own space while you stay open.
If the space needs a larger electrical service, the power company has to disconnect and reconnect it. Here that is Duke Energy, Fayetteville PWC, Lumbee River EMC or South River EMC, and we coordinate the outage with them.
Types of spaces we upfit
Retail stores
Sales floor lighting, register and counter power, sign circuits and stockroom lighting.
Restaurants
Circuits for kitchen equipment and coolers, dining room lighting on dimmers, and cabling for the registers.
Medical and dental offices
Power for exam and treatment room equipment, and network cabling to every room.
Offices
Power and data to desks and conference rooms, and new lighting layouts when walls move.
Churches
Sanctuary and stage lighting, power for sound and video equipment, and classroom and fellowship hall wiring.
Warehouses
High-bay lighting, power for machinery, and office space built inside the warehouse.
Tenant upfits, answered
What does an electrician do on a tenant upfit?
The electrician installs power for your equipment, lighting, receptacles and any panel changes the new layout needs, plus the exit and emergency lighting. We also run the data cabling with the same crews. Then we see the work through the electrical inspections.
How much does the electrical work for a tenant upfit cost?
It depends on the size of the space, the equipment you are bringing in and how much of the existing electrical can be reused, so there is no honest flat number. We give a written bid from your plans or from a site visit before any work starts. Start with the bid request form.
Do I need an electrical permit for a commercial upfit in Fayetteville?
Yes. New circuits and panel or service work need an electrical permit and an inspection by the local inspections office, which is the City of Fayetteville or Cumberland County depending on the address. We pull the permit and meet the inspector.
Can you price an upfit if I do not have drawings?
Yes. Many smaller upfits have no electrical drawings. We walk the space with you, look at the existing panel and ceiling, write up a scope of work and bid from that.
Can you work in an occupied building?
Yes. Most upfits are in buildings where other tenants are open. Work that would disrupt them, especially anything that means shutting off power, is planned with the landlord or property manager and scheduled around business hours.
Do you install the data cabling too?
Yes. Our crews do both the electrical and the structured cabling, which is the network wiring to desks, registers and wireless access points. We do not sell or set up phone systems or provide IT support.
Do you work for general contractors, or directly for tenants and landlords?
Both. General contractors send plans and get one bid that can cover electrical and data. Business owners, landlords and property managers can hire us directly, which is common on smaller upfits. See our commercial electrical page for licensing and insurance details.
Bidding a project?
Send drawings or ask for a walk-through. You get a written bid from the licensed contractor who will run the job.
Other services
Where we work Fayetteville · Raeford and Hoke County · Hope Mills · Fort Bragg area · Spring Lake · Lillington, Dunn and Erwin