NC LicenseU.36332 — Unlimited GL$2M / $4M CoverageNorth Carolina Statewide Tel(910) 973-8600
Home/Lighting Installation
E-66

Lighting installation in Fayetteville, NC

Recessed lights, fixture swaps, ceiling fans and outdoor lighting for homes, and LED retrofits for offices, shops and warehouses. Common home jobs have a published flat rate, and you can book online.

Savant electrician on a ladder installing track lighting at the Greater Fayetteville Chamber's new office
Track lighting going in at the Greater Fayetteville Chamber office
Lighting Work

A licensed electrician for the lights in your house

Most lighting calls we get around Fayetteville are one of a handful of jobs. Add recessed lights to a dim kitchen or living room. Swap a dated fixture. Replace a ceiling fan that wobbles or has quit. Put a light where the driveway or the back door is dark.

Savant Solutions Inc, also known as Savant Electrical, is a licensed North Carolina electrical contractor (Unlimited License U.36332) with a shop in Raeford. We work in Fayetteville, Hope Mills, Spring Lake, Raeford and the rest of Cumberland and Hoke counties. The same crews do lighting in homes and in commercial buildings, so this page covers both.

At Home

Home lighting and what it costs

These are our published flat rates. Anything not listed is priced flat-rate or by written estimate before work starts.

Recessed

Recessed LED lights

A new recessed LED light is $300 installed. They suit kitchens, living rooms and hallways where one ceiling fixture leaves the corners dark.

Fixtures

Light fixture replacement

Taking down an old fixture and hanging a new one in the same spot is $300. Pendants, flush mounts and vanity lights are the common ones.

Fans

Ceiling fan replacement

Replacing an existing ceiling fan is $275. If that spot has never held a fan, we check that the ceiling box can carry the weight and price any change before we start.

Outdoor

Exterior and motion lights

Replacing or adding an exterior light is $400. That covers porch lights, floodlights and motion lights over a driveway, garage or back door.

Kitchen

Under-cabinet lighting

Slim LED lighting under the upper cabinets puts light on the counter where you work. It depends on the cabinet layout and where power is available, so it is priced by written estimate.

Dimmers

Dimmers and switches

Replacing a switch with a dimmer is $300, and a new switch location is $300. Smart switches and other smart devices are $275 to install.

Simple or Involved

What makes a lighting job simple or involved

Three things decide how much work a lighting job is.

The first is the wiring and switch that are already there. Swapping one fixture for another on an existing switch is the simple case. A light where there has never been one needs new cable and usually a new switch, and that is more work.

The second is access above the ceiling. With an attic over the room, we can run cable from above and cut only the holes for the lights. Under a second floor there is no attic, so cable has to be fished through the ceiling. That takes longer and can mean small drywall openings.

The third is ceiling height. A standard ceiling is ladder work. A two-story foyer or a vaulted great room may need taller ladders or scaffolding, so we price those after seeing them.

On permits: a like-for-like fixture swap generally does not need one. Lighting that needs a new circuit does, and then we pull the permit and meet the inspector.

Dimmers and LEDs

Why some LED lights flicker on a dimmer

LED lights use far less power than the old incandescent bulbs, and many older dimmers were built for the old bulbs. Put LEDs on one of those dimmers and you can get flicker, a buzz, lights that glow faintly when they are off, or dimming that stops halfway down.

The fix is usually a dimmer made for LEDs, matched to the lights it controls. The bulb or fixture also has to be marked dimmable, because not every LED is. When we put lights on a dimmer, we check the two against each other and test the full range before we leave.

You are welcome to supply your own fixtures. Have them at the house and check the box for all its parts before we arrive. If you would rather we bring the fixtures, tell us when you book so the price is clear up front.

For Business

Commercial lighting and LED retrofits

Commercial lighting is priced by written estimate after we see the space or the plans, and the work is planned around your business hours.

Retrofit

LED retrofits

Converting fluorescent lighting to LED in offices, shops and retail space. The fixture stays in the ceiling and LED replaces the fluorescent tubes inside it.

Troffers

One-for-one troffer replacement

A troffer is the rectangular light that sits in a drop ceiling grid. We take the old one out and set a new LED fixture in the same opening.

Warehouse

High-bay lighting

High-bay fixtures are the lights that hang from tall warehouse and shop ceilings. We replace existing ones and add new ones.

Exterior

Exterior and parking lot lighting

Lights on the building and on poles for parking lots, loading areas and walkways, replaced or added.

Booking

How a lighting job goes

01

Book, or ask for an estimate

Home jobs with a flat rate can be booked online. Pick the times that work and the office confirms by text. Bigger projects and commercial lighting get a written estimate first. An estimate appointment is $100, credited to the job when you go ahead.

02

We check what is there

Before anything is cut, we look at the existing wiring, the switch and what is above the ceiling, and confirm the price with you.

03

Layout and install

We mark where the lights will go and agree on it with you. Then we cut in, wire and mount them.

04

Test and pay

Every light and dimmer is tested with you in the room. The invoice comes with a secure online pay link for card, bank transfer, Apple Pay or Google Pay.

Common Questions

Lighting, answered

How much does it cost to install recessed lighting in Fayetteville, NC?

A new recessed LED light is $300 installed. The job is simplest with attic access above the room. Rooms under a second floor and high or vaulted ceilings take more work, and we tell you before we start if your ceiling changes the price.

Can you install light fixtures I bought myself?

Yes. Customers may supply their own fixtures and ceiling fans. Have them on site with all the parts in the box, and tell us what you bought when you book online so we know what to expect.

Why do my LED lights flicker when I dim them?

Usually the dimmer is an older type built for incandescent bulbs, or the LED bulbs are not the dimmable kind. A dimmer made for LEDs and matched to the lights normally cures it. Replacing a dimmer is $300.

Do I need a permit to add or change lights?

Swapping a fixture, switch or dimmer like for like generally does not need a permit. Lighting that needs a new circuit does need an electrical permit and an inspection by the local inspections office. When a permit is needed, we pull it and meet the inspector.

Can you add a ceiling light or fan to a room that has none?

Yes. It means running new cable to the ceiling and usually adding a switch, so it is more work than a swap. How much depends on attic access and the ceiling, and the job is priced flat-rate or by written estimate before work starts.

Do you do LED retrofits for offices and warehouses?

Yes. We convert fluorescent lighting to LED, replace troffers one for one, and install high-bay and parking lot lighting. Commercial lighting is priced by written estimate. Ask for one through the bid request form or see our commercial electrical page.

When can you come out to install lights?

We work Monday to Thursday 8:00am to 6:00pm and Friday 8:00am to 4:00pm, and we are closed weekends. Book online, pick the times that work for you, and the office confirms by text. You can also call or text (910) 973-8600.

Ready when you are

Book online, pick the times that work, and the office confirms by text. Or call (910) 973-8600.

Book Online
Related

Other services