Electrician in Lillington, NC and Harnett County
Electrical work for Harnett County homes and rural properties in Lillington, Dunn and Erwin: repairs, panels, and power run out to the shop, the barn or the well.
Electrical work for houses with some land around them
A lot of Harnett County property is more than a house on a lot.
There is a well. There is a shop, a barn or a detached garage. The meter may be a long way from the house, and the house a long way from the building you want power in. That changes the electrical work, and it is the kind of job we are set up for.
This page is for homeowners in Lillington, Dunn and Erwin, which are the Harnett County towns we cover for now. If you are elsewhere in the county, call and ask.
Savant Solutions Inc, also known as Savant Electrical, holds NC Unlimited Electrical Contractor License U.36332 and carries $2M / $4M general liability insurance. Our shop is in Raeford, in Hoke County, so Harnett County is at the farther end of our service area. We come here by appointment, which is why booking a set time matters.
What rural Harnett County properties need
Power to a shop, barn or garage
A buried or overhead line from the house or meter to the building, with its own panel inside for lights, outlets and equipment. Priced by written estimate.
Well pump circuits
We troubleshoot and repair the electrical side of a well: the breaker, the wiring and the disconnect switch that feed the pump. A service call is $250 and includes the trip and the first hour.
Long service and feeder runs
Over a long distance, wire has to be larger so the voltage does not sag at the far end. We size it for the distance and the load so equipment runs properly.
Generator hookups
A portable generator inlet with an interlock or transfer switch, or a Generac standby generator. On a well, backup power also means running water. See generator hookups.
Panel upgrades and service changes
A 200-amp panel replacement is typically $2,500 to $4,000 installed, including the permit and inspection, and is usually done in one day.
Yard and exterior lighting
Replacing or adding an exterior light is $400. Larger yard lighting jobs are priced by written estimate.
What to know before you run power to a building
Three questions set the price of power to an outbuilding. How far is it from the house or the meter? What will you run in it? And can your existing electrical service carry the extra load?
A shed that needs a light and two outlets is a small job. A shop with a welder, an air compressor or a car lift is a different one, and it may need a larger line or an upgraded service. Tell us what you plan to plug in, including what you might add later, and we will size it once so you are not paying to redo it.
Because every property is different, this work is priced by written estimate after we see it. An estimate appointment is $100, credited to the job when you go ahead. New circuits and building feeds need an electrical permit and an inspection, and we handle both.
How to book us in Harnett County
Book online
Book online and choose times that work for you. Mention anything that helps us find the place, such as a gate or a long driveway.
We confirm by text
The office confirms your appointment by text. Office hours are Monday to Thursday 8:00am to 6:00pm and Friday 8:00am to 4:00pm.
Service call or estimate visit
For a repair, the $250 service call covers the trip and the first hour. For a project such as a shop feed, a generator or a panel, the estimate appointment is $100, credited to the job when you go ahead.
A written price
Listed jobs are done at the published price. Everything else is priced flat-rate or by written estimate before work starts.
Pay by secure link
Your invoice includes a secure online pay link for card, bank transfer, Apple Pay or Google Pay. Larger jobs can be split into payments at checkout.
Harnett County inspections, Duke Energy and South River EMC
Electrical permits for this area go through Harnett County inspections. Panel and service work, new circuits, generators, EV chargers, hot tubs and pools all need a permit and an inspection. We pull the permit, do the work to the North Carolina electrical code and meet the inspector.
Your power company is Duke Energy or South River EMC, depending on the address. A service change needs the power company to disconnect and reconnect the power. We coordinate that with them so the work and the reconnection line up.
Harnett County businesses and contractors
We do commercial and industrial electrical work in Harnett County as well: tenant upfits, lighting and LED retrofits, service upgrades, switchgear, and structured cabling and fiber. Our crews do both the electrical and the data, so a general contractor or building owner deals with one company for both. See commercial electrical, or call (910) 973-8600 about a project.
Harnett County questions
Do you serve Dunn and Erwin as well as Lillington?
Yes. Those are the Harnett County towns we cover for now. If you are somewhere else in the county, call or text (910) 973-8600 and ask.
How much does it cost to run power to a shed or shop?
It depends on the distance, what you plan to run in the building and whether your existing service can carry it, so it is priced by written estimate after we see the property. An estimate appointment is $100, credited to the job when you go ahead. The work needs an electrical permit and an inspection, which we handle.
My well pump has no power. Can an electrician fix that?
We can check the electrical side: the breaker, the wiring and the disconnect that feed the pump. A service call is $250 and includes the trip and the first hour. If the electrical supply is good and the pump itself has failed, you will need a well company for the pump.
Who is the power company in Lillington, Duke Energy or South River EMC?
It depends on the address. Both serve parts of Harnett County. For a service change, we coordinate the disconnect and reconnect with whichever one serves your property.
Do I need a permit for electrical work in Harnett County?
For panel and service work, new circuits, generators, EV chargers, hot tubs and pools, yes. Those need an electrical permit and an inspection through Harnett County inspections. We pull the permit and meet the inspector.
How much does an electrician service call cost in Lillington?
A service call is $250 and includes the trip and the first hour. Common small jobs have published prices, and anything else is priced flat-rate or by written estimate before work starts.
Can a generator run my well pump during an outage?
Often yes, if the generator is large enough and it is connected properly. We install a generator inlet with an interlock or transfer switch so the generator can feed your panel safely, and we can tell you whether your generator will carry the pump.
Ready when you are
Book online, pick the times that work, and the office confirms by text. Or call (910) 973-8600.
Other services
Where we work Fayetteville · Raeford and Hoke County · Hope Mills · Fort Bragg area · Spring Lake