Savant Solutions is an unlimited-licensed North Carolina electrical contractor. We self-perform electrical construction and structured cabling — so your Division 26 and Division 27 scopes run on one schedule, under one accountable contractor. Serving Fayetteville, Fort Bragg, Raeford and the Sandhills — licensed statewide.
Send drawings straight to the licensed contractor who will run your job. One subcontract covers electrical and communications — no second vendor to coordinate, no low-voltage gap in your buyout.
Request a BidPLANS TO [email protected] · OFFICE MON–FRI 8–6 · PREQUAL PACKET E-03
Panel upgrades, troubleshooting, EV chargers and standby generators — booked online with a confirmed appointment window.
Book OnlineFrom switchgear to certified fiber, our crews self-perform the work most electrical contractors subcontract out.
Heavy conduit routing in EMT and rigid, MC cable pulling, lighting and device upgrades, HVAC disconnects, and industrial machinery power connections — retail, office, restaurant and industrial facilities, new construction or occupied-facility remodel.
High-capacity panel replacements, service upgrades, and commercial switchgear installation — including phased cutovers that keep active facilities running.
Cat6/6A structured cabling, multimode and singlemode fiber with certification testing, data room and MDF/IDF rack build-outs, point-to-point wireless campus links, and VoIP systems.
Generac generator sizing, installation, and transfer-switch integration — business continuity for commercial facilities and whole-home standby for residences.
Commercial, fleet, and residential charging deployment — from service capacity analysis through final commissioning. SPAN Authorized Installer: smart panels that add a charger to a full 200-amp service, often without a utility upgrade.
Lighting assessments and LED retrofits that balance light levels, energy cost and appearance — including one-for-one fixture replacement in occupied space.
Inspections that surface code violations before the AHJ does, with a written punch list and corrections priced up front.
Multi-building campus backhaul links where trenching fiber between buildings is impractical or uneconomic.
Commercial voice systems installed and cut over alongside the structured cabling they run on — no separate telecom vendor to schedule.
Emergency response to outages, electrical hazards and equipment failures, prioritized to minimize downtime — plus routine troubleshooting for homeowners across the Sandhills, with online booking and confirmed windows.
Most electrical subs farm out the low-voltage. We came up through it — our owner ran an IT services business before earning an unlimited electrical license — so your data rough-in runs on the same schedule as your branch circuits.
Our NC Unlimited Electrical License means no project value cap and no scope your prequalification team has to work around.
Off-site material pre-kitting and specialised truck-stocking systems mean crews arrive fully equipped — no supply-house runs eating into your schedule.
We plan phased upgrades around your operations, not the other way around — proven in active manufacturing and commercial environments.
Representative work across industrial, commercial, municipal utility and carrier-grade communications scopes.
Comprehensive electrical modifications for a warehouse expansion: relocation of 100 high-bay light fixtures, electrical disconnection and demolition for heavy manufacturing machinery and industrial HVLS fans, and installation of new expanded lighting systems.
Complete commercial lighting and power upfit for the Chamber’s new facility. Retrofitted 89 legacy fluorescent fixtures with high-efficiency LED troffer panels, installed track lighting, expanded branch circuit power for numerous new receptacles, and ran dedicated feeds for exterior facility signage.
Structured cabling contractor for the municipal utility since 2022. We run the data cabling across PWC facilities — multiple buildings on the main campuses as well as the water and wastewater treatment plants — on a recurring basis, working around live utility operations.
Carrier-grade fiber optic pulls and infrastructure projects — including Google Fiber in Raleigh and Spectrum contract installs — along with multi-building point-to-point wireless network bridges.
Commercial and industrial construction is our core business. Residential service runs through the same licensed crews and the same code standards — just booked in a couple of clicks instead of a bid package.
The crews that wire manufacturing facilities handle your home, which means your panel swap, SPAN smart panel or EV charger gets commercial-grade workmanship and full code compliance — with a confirmed appointment window, not a four-hour guess.
"The gentlemen who did the work were smart, knowledgeable and conscientious. The job consisted of a variety of expertise that is difficult to find in one place. The job took a lot longer than anticipated because of some peculiarities in the construction of my house. They stayed and finished the work without charging beyond their original estimate. I would call on them again and probably will."Donald S. — Erwin, NC
License, coverage, and classifications — verifiable, and formatted the way your prequal packet asks for them.
Greater Fayetteville Chamber — Member
Home Builders Assn. of Fayetteville — Member
Consumer Protection Division — Listed
HomeAdvisor — Listed
Smart Panel — Authorized InstallerYes. Savant Solutions Inc. is the registered company name — the one on our North Carolina electrical license, our insurance certificates and our contracts. Savant Electrical is the logo on our trucks, our building and our shirts, so plenty of people know us by that name instead. Same company, same crews, same phone number.
Our primary service area is Greater Fayetteville, Fort Bragg, Raeford and the surrounding Sandhills — Hoke, Cumberland, Harnett and Sampson counties. We also take work in the Raleigh–Durham Triangle and Charlotte Metro, and our unlimited license covers projects statewide in North Carolina.
Yes. We hold North Carolina Unlimited Electrical License #U.36332, verifiable through the NC Board of Examiners of Electrical Contractors. We carry $2,000,000 per occurrence / $4,000,000 aggregate general liability, $1,000,000 commercial auto and $1,000,000 workers’ compensation, and our field staff hold active OSHA 30 and OSHA 10 certifications.
Yes — commercial and industrial construction is our core business. Send drawings to [email protected] and they are reviewed by the licensed contractor who will actually run the job. One subcontract covers both Division 26 electrical and Division 27 communications.
Both, self-performed. Structured cabling in Cat6 and Cat6A, multimode and singlemode fiber with certification testing, point-to-point wireless links and commercial VoIP phone systems all run on the same schedule as the branch circuits — no second vendor to coordinate.
Yes. Residential work — panel upgrades and service changes, SPAN smart panels, troubleshooting, EV charger installation, Generac standby generators, ceiling fans and home network cabling — can be booked online with a confirmed appointment window.
Yes — Savant Solutions is a SPAN Authorized Installer. A SPAN panel replaces the main load center and lets you monitor and control every circuit from your phone, but its practical value is capacity: it manages loads dynamically, which often means an EV charger, heat pump or battery can go on an existing 200-amp service without a utility service upgrade, and during an outage it decides which circuits a battery keeps running. We will tell you straight whether a SPAN panel or a conventional upgrade is the better fit for your house.
The office is open Monday to Friday, 8:00am to 6:00pm, and closed weekends. We hold dedicated rapid-response capacity for diagnostic and troubleshooting work — outages, electrical hazards and equipment failures are prioritised to minimise downtime for commercial facilities.
A 200-amp panel replacement typically runs $2,500 to $4,000 installed, including the permit and inspection, and takes one day. Full service upgrades with a new meter base and mast run higher. We quote flat-rate after seeing the panel, and the price we quote is the price you pay.
Yes for panels, new circuits, EV chargers, generator inlets and service work. We pull the permit and schedule the inspection as part of the job. Small like-for-like replacements (a switch, a receptacle, a fixture) generally do not require one.
An interlock is a kit on your existing panel that lets a portable generator feed the whole panel through an inlet box, one circuit at a time by choice. A transfer switch is a separate box that feeds a fixed set of circuits. For most homes with a portable generator the interlock is the simpler, less expensive option. Either one is the only safe way to connect a generator; plugging into a dryer outlet back-feeds the utility line.
Usually yes. Options are a load-management device, a subpanel, or a SPAN smart panel, which manages loads so a Level 2 charger fits on a 200-amp service without a utility upgrade. We are a SPAN Authorized Installer. We look at your panel and the service size before quoting.
Most service calls in Fayetteville, Fort Bragg, Raeford and Hope Mills are scheduled within one to three business days. Emergencies (burning smell, panel buzzing, no power to part of the house) are same-day when possible. Book online at bookanelectrician.org or call (910) 973-8600.
Yes. We hold a current installation pass and do both government contract work on post and residential work in the surrounding communities. For on-post housing, the housing office usually has to authorize the work first; we can help with that paperwork.
Drawings are reviewed and quoted by the licensed contractor who will actually run your job — not a call center. Homeowners can skip the form and book directly online.
Email Plans to [email protected]